IP Phone Adaptor Installation Instructions.
Setting up your account
  1. Make sure you are connected to the Internet and visit www.vipernetworks.com/activate
  2. Enter the VIN number which is located on the back of your IP Phone Adaptor or its product packaging then click “Enter”.
  3. Review the “Terms & Conditions” screen, check “Yes” and then Click “Next”
  4. Your personal vPhone number will be automatically generated and displayed on the next screen.
    Be sure to write it down ________________________
  5. Choose a PIN number (any 6+ numeric digits – no letters). Your PIN is what you will use along with the vPhone number you were just issued to log into your account.
    Be sure to write it down ________________________
  6. Complete all required information fields as requested (a valid e-mail address is required) then Click “Activate”.
Download and install the vPhone Dialer Software
  1. Visit http://solutions.vipernetworks.com/downloads.htm and download the correct vPhone Dialer for your Operating System or you may choose “Download vPhone Dialer” from the last page of the account activation process. (It is recommended that you close any open programs or anti virus software since it may interfere with installation).
  2. When prompted on the file download screen, Click “Open”.
  3. After download is complete Click “OK”.
  4. After the “Preparing to Install” Screen, Click “Next, Next, Next, Finish”.
  5. After your Dialer is installed, you may or may not be asked to restart your computer.
  6. The vPhone icon should now appear on your desktop.
Installing the IP Phone Adaptor
Simply plug one end of the supplied USB cable into the IP Phone Adaptor and the other end of the cable to an available USB port on your computer. Next connect any standard corded or cordless telephone into the IP Phone Adaptor using a standard telephone cord. A red light will appear on the IP Phone Adaptor.
Using your IP Phone Adaptor
  1. Double click the vPhone icon on your desk top then Click “OK”.
  2. Login using the vPhone Number and “PIN” you selected during the Activation process.
  3. First time users should complete the “Tuning Wizard” program by choosing the “Settings” button on the vPhone dialer, then the “Audio” tab, and finally the “Audio Tuning Wizard” button. Make sure you select “USB Audio Device” for both your speakers and microphone. The Tuning wizard will help to insure that you have your vPhone’s microphone and speaker set to the appropriate levels.
  4. You may now make phone calls by using the dialer on your computer screen or simply use the telephone you have plugged into your IP Phone Adaptor by dialing (1+ area + number for Domestic USA calls or 011+ country code and number for international calls). Remember to always use “1” and the area code of the number you are calling even if you are originating a call from that area code. Please note that your vPhone does not allow calls placed to 800 / 888 or other “toll free” numbers.
  5. Press the “#” key on the telephone you have plugged into your IP Phone adaptor to dial the call or you may click the “Talk” button on the vPhone Dialer. The “#” key is useful if you are using a cordless telephone and are not at your computer when placing calls with the IP Phone adaptor.